Vexilar Flasher Family 2013 - Manual (Page 49)

49
Portable Options
A suction cup bracket is an option if you want to quickly install and remove the transducer
from the boat.
BK0044
Fits all High-Speed style transducers and allows for readings
at speeds above the planing speed of the boat. Dual suction
cups offer a secure hold.
BK0027
Fits all 2” Puck style transducers.
(7°, 9°, 12°, and dual
9°/19°)
. Offers a secure hold and the ability to point
the transducer in a specific direction.
BK0023
Fits the 1” (19°) Puck Transducer. This bracket makes it
the smallest portable transducer option available.
Note - suction cup brackets do not include the transducer.
Did You Know? : Vexilar does not offer a suction cup bracket to fit the ice fishing style
transducers. This is because the Ice-Ducer cable is made to stay soft in very cold
temperatures. Therefore, it is very easy to damage in warm temperatures, thus open water
use is not recommended.
IMPORTANT : Suction cups can come
loose. Each bracket includes a safety
rope. Be sure to take the time to tie the
rope to the bracket and then to the boat
leaving as little amount of slack as you
can. If the cup(s) come lose, this will
keep your transducer and cable out of
the propeller.
DOWN