Vexilar Flasher Family 2013 - Manual (Page 23)

23
Multi-Layer Display
The FLX-28 incorporates a three-layer LED, spinning wheel display. The outer color
display layer is like our standard three-color Vexilar flasher display. However, with
data transfer technology, we can offer more color palettes.
The inner layer gives you a green marker for every
foot shown on the display. This makes it easy to
position your baits one or two feet off the bottom
with no guessing.
As you change depth ranges, the line counts
for each display will correspond to the depth
changes as
shown in the
table.
Foot Markers Range Settings
1ft 10 - 30ft
5ft 40 - 60ft
10ft 80 - 300ft
The third inner layer of
the display will be in
red, where you find your
Digital Depth and Range
settings. This area is also
used to display battery
levels, IR setting levels
and your mode settings.