Section 2. prepare the machine for sewing, Know what the presser feet will do (continued) – Sears KENMORE 385. 17928 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 2. PREPARE THE MACHINE FOR SEWING
1
Know What the Presser Feet Will Do (Continued)
• Change the Presser Foot (Continued)
• Presser Foot Types
Zigzag Foot
To Snap On
1.
Place the presser foot so the hori
zontal pin on the foot lies just
under the groove of the foot
holder.
2.
Lower the presser foot holder to
lock the presser foot in place.
NOTE:
If you do not hear the
presser foot snap in place,
press down on the presser
foot holder firmly until you
hear the snap.
Straight Foot
H: Straight foot
Use this foot for both straight and zigzag
stitcing.
Uses: Zigzag stitching (see page 36),
Bar tacking (see page 38),
Button sewing (see page 40),
Overcast stitch (see page 41),
Lace work (see page 43),
Three-step zigzag (see page 44),
Box stitching (see page 45),
Two-point shell stitching
(see page 46),
Fagoting (see page 46),
Two-point box stitch (see page 47),
Overedging stitch (see page 47),
Rick-rack stretch (see page 49),
Smocking (see page 50),
Elastic stretch (see page 51),
Stretch patching (see page 52),
Herring bone stretch (see page 52).
Use this foot exclusively for straight stitching
using center needle position only.
Uses: Straight stitching (see page 31),
Topstitching (see page 33),
Straight stretch (see page 49).
12