Sears KENMORE 385. 17928 User Manual
Page 67
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 5. CARE FOR THE MACHINE
Clean the Hook Race and Feed Dogs
Oiling the Machine
1.
Unplug the machine and remove
the presser foot and needle.
2.
Remove the bobbin cover plate.
3.
Remove the screw on the left side
of the needle with the large screw
driver.
4.
Remove the needle plate.
Take out the bobbin. Lift up the
bobbin holder and remove it.
6. Use the lint brush to clean the
feed dogs, hook race and bobbin
holder. Also use a soft, dry cloth.
Line up the triangle marks and
position the bobbin holder so the
notch fits next to the stopper in
the hook race.
Open face cover plate and oil two points as shown below at least once a year. One
or two drops of oil is sufficient.
Remove excess oil, otherwise it may stain fabrics.
Use good quality sewing machine oil.
No other oiling is required
Above points are only area which
require oiling on this machine.
65