Sections. learn the stitches, Straight stitches (continued) – Sears KENMORE 385. 17928 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTIONS. LEARN THE STITCHES
Straight Stitches (Continued)
• Dropping the Feed Dogs
back side of the machine.
(T) To raise the feed dogs, push (|) For dropping the feed dogs.
the lever in the direction of
the arrow as illustrated.
Then turn the handwheel.
* Feed dogs must always be up
for normal sewing.
push the lever in the direction
of the arrow as illustrated.
Darning
■
H
2.
Stretch the fabric with the hole in the center
between embroidery hoops, as shown.
3.
Lower the presser bar and sew at a slow
speed.
4.
Move the fabric back and forth slowly until
you have covered the darning area.
5.
Turn the fabric 1/4 turn and sew another
layer of stitching over the first layer.
NOTE:
If your fabric is thin or badly damaged
use a separate piece of fabric under the
hole to reinforce it.
6
.
When you finish darning, return the pressure
dial to 3.
32