Sears KENMORE 385. 17928 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
SECTION 2. PREPARE THE MACHINE FOR SEWING
•1
• Bobbin Winding
(T) Pull the clutch knob away from the machine to disengage clutch.
(|) Draw the thread from the spool.
@ Gu ide the thread around the bobbin winder thread guide.
(
4
) Insert the thread through the hole in the bobbin, threading from the inside to the outside.
@ Put the bobbin on the bobbin winding spindle, and push it to the right.
(D
With the free end of the thread held in your hand, depress the foot control.
The machine will not sew until the clutch knob is pushed in.
17
Advertising