Sears KENMORE 385. 17928 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
SECTION 2. PREPARE THE MACHINE FOR SEWING
1
• Insert the Bobbin into the Bobbin Holder
1. Put the bobbin into the bobbin
holder so that the thread feeds
counter-clockwise (left).
Pull about 4 inches of thread
toward you through the tension
slot
.
3.
Then pull the thread clockwise
toward the back of the machine
through the slot .
4. Pull out about 15 cm (
6
") of thread
and attach the hook cover plate.
18
Advertising