Section 2. ..prepare the machine for sewing, Prepare the top thread (continued) – Sears KENMORE 385. 17928 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4 ■:
■ - i-' .■■-- ; '':''4r-^‘i4-■- ■■:'..■■■ •' ■ ■ '■■■■•■■:■.-■-■. '=- ■
SECTION 2. ..PREPARE THE MACHINE FOR SEWING
Prepare the Top Thread (Continued)
For Zigzag Stitch
In the correct zigzag stitch, the bobbin threads will not show on the top side
of fabric and the top threads will show slightly on the bottom side. See
below for the correct appearance. To match this appearance, adjust the top
tension.
Top tension
Too Tight
Too Tight:
----- Corner of each
zigzag
will
pull
together
on
the
top side of fabrics.
Top tension
Too Loose
Bottom side of Fabric
Too Loose:
----- The top thread
will
loop through
bottom
side
of
fabric and will be
pulled
almost
together.
Just Right
22
Bottom side of Fabric
Just Right:
Minimize
the
amount
of top thread visible on
the
bottom
side
of
fabric
without
causing
excessive puckering or
causing
the
bobbin
thread to show on the
top side. Results vary
with fabric, thread and
sewing conditions.