Stitch selector – Sears KENMORE 385. 17928 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 2.
PREPARE THE MACHINE FOR SEWING
I
Stitch Selector
The stitch selector control determines the stitch you select.
Simply turn this control until the desired stitch is indicated by the red indicator on the stitch indicator panel.
The bottom row of stitches is selected when the stitch length control is set at the stretch stitch position.
Suitable width, stitch length and foot are shown in the guide message window.
When you select the desired stitch by turning the stitch selector, the information in the window will change
automatically.
Please use the colour in the guide window which corresponds to the colour of the stitch you select.
NOTE: To avoid needle or fabric damage, be sure your needle is up and out of fabric when selecting a stitch.
23