Sears KENMORE 385. 17928 User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
'■k .«* ;
•fl
"TTT*
■ SbCTtQN 3 LEAHN THE STITCHES ' '
Zigzag Stitches (Continued)
Applique
Set the Machine
Stitch width
,
control 2 to 5
Top thread tension
control 2 to 6
mu
F: Satin stitch
toot
Stitch length
control 0.5 to 1
- 2
.
Pressure dial: 2
Baste (or fuse with iron-on fabric
joiner) applique pieces on the fabric.
Stitch around the applique making
sure the needle falls along the outer
oHno nf tho annliniio
When sewing corners, lower the needle
down
into
the
fabric.
Raise
the
presser foot and pivot the fabric to the
right or left.
Bar Tacking
Set the Machine
>
Stitch width
control 2 to 5
I
A: Zigzag foot
This Stitch is similar to a very short
satin stitch and is used to reinforce
points of strain such as corners or
pockets and straps on lingerie.
Sew 4 to 6 zigzag stitches.
38