Sears KENMORE 385. 17928 User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■ SECTIONS. LEARN THE
stitches
'*'
Embroidery
Set the Machine
5
Stitch width
control 1 to 5
Top thread tension
control 2 to 6
Stitch length control
Any number (not
necessary to adjust)
-2
No presser
foot
Stretch Stitch
Drop feed lever
Here's How
1. Drop the feed dogs (see page 32).
2. Remove foot holder (see page 11).
3.
Adjust the stitch width as desired
(see page 24).
4. Draw the design on to the fabric with
tailor's chalk.
5. Stretch the fabric between embroidery
hoops and place under the needle.
6.
Lower the presser foot lever to
engaged the top thread tension.
7. Holding the top thread in your left
hand, rotate the hand wheel toward
you one complete turn.
Pull the top thread to draw the bobbin
thread through to the surface of the
fabric.
8. Using a medium speed, stitch along the
marked outline, guiding the fabric
carefully by hand.
9. When finished embrodiering, raise the
feed dogs (see page 32).
39