To clean the machine – SINGER 401A User Manual
Page 104
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
86
TO CLEAN THE MACHINE
CLEAN
BETWEEN
TENSION
DISCS
CLEAN
CLEAN
AND
Your sewing machine was built to exacting
standards of precision and workmanship. Its per
formance depends on the care and treatment it
receives when in use and before storing it away.
When in regular use, the machine should be
cleaned periodically to remove the lint and fluff
which may have accumulated around the work
ing parts. To clean the bobbin case area, see in
structions for removing and replacing bobbin
case on
pages 87
and
88.
Oil the machine after
each cleaning as instructed on
pages 89, 90
and
91.
If the machine is to be stored away for an in
definite period of time, a thorough brush-clean
ing to remove all traces of lint and fluff, followed
by swabbing of all exposed parts with a lint-free
brush saturated with SINGER* Oil, is necessary
to protect the machine against rust damage. The
areas that should be cleaned and covered with a
protective coat of oil are shown in the illustration
at the left.