Wind the bobbin (confd.) – SINGER 401A User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
WIND THE BOBBIN (Confd.)
Place thread on spool pin and lead between
bobbin winder tension discs. Thread through
hole in left side of bobbin as shown.
Hold thread end to start winding. Activate
machine.
I-...,.
jlllll
■'■••v.-Wiv
Full bobbin will automatically release.
Tighten stop motion screw.
Advertising