Muiti-slotted binder – SINGER 401A User Manual
Page 89
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
71
MUITI-SLOTTED BINDER
Lower the presser bar. Allow the attachment to do the work, merely guiding
the fabric into the center of the scroll as you stitch.
Curved edges require slightly different fabric handling than straight edges.
Inside curves are stra;ightened as they are fed into the binder. If the fabric is
soft and has a tendeney to stretch, reinforce the edge with a single row of
stitching before binding.
Outside curves tend to lead away from the center slot of the scroll and should
be guided so that a full seam width is taken at the needle point. Do not attempt
to pull or straighten fabric into the full length the scroll.
A ■ *. i 1 L Jl
I