The zipper foot, Appucations – SINGER 401A User Manual
Page 79
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
61
THE ZIPPER FOOT
This foot is designed to facilitate the placement of stitch
ing close to a raised edge. The hinged feature of this foot
insures even feeding over pins, heavy layers of fabric or
cross seams. It is attached to the machine in place of the
regular presser foot, and may be adjusted to either the right
or left side of the needle. Straight stitch or zigzag settings
may be used.
APPUCATIONS
Zipper Insertions
Corded Seams
Tubular Cording
Slip Cover Welting
Preparation.
Secure the zipper foot to the
presser bar as you would the regular presser foot.
Set Selector and Red Lever, Adjustment to the
right or left of the needle is made by loosening
the thumb screw at the back. Check the position
of the foot by lowering the needle into the side
notch, making sure it clears the foot. Lock it
into position by tightening the thumb screw.