Adjusting pressure and feeding of fabric, Adjusting pressure and feed – SINGER W134 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
15
Fig. 15 if
Fig. 16
Fig.
Fig. 14
ADJUSTING PRESSURE AND FEEDING OF FABRIC
General Sewing. Usually for normal sewing the pressure bar
cap or darner release, 21, Fig. 18, is at its lowest position and the
drop feed knob is turned to "HI" position. Fig. 19.
Sewing Thin or Light Weight Fabrics. When lighter pressure
is required to sew satisfactorily on thin silk or filmy material, the
pressure cap should be about halfway down. Release all the way
by pressing the snap lock, (A, Fig. 20 , and then press cap (B)
down again to halfway spot. Lower the feed slightly by turning
the black dot on the knob to "LO" position.
Fig. 18
Fig. 19