SINGER W134 - Manual (Page 24)

. l.c. the belt on yout machine, the hand wheel
If it should eve, become necessary to replace th
must first be loosened and moved out.
r. « .....,, .... .»•
1. Remove clutch nut (A) m „„til it can be lifted off.
Fig. 24. Turn nut the washer, (C, Fig- 25), whroh fils
2. Before moving the hand wee
under the clutch nu . enough to make
3 Pull hand wheel away from the machine carefully, Frg. 26,
^grooved section which holds the belt accessrble.
^ 1 1 cxfor T3ullev on the end of motor.
4. Slide old belt over hand wheel and P
1
K U into arooved section and over motor pu ey.
5 Slide new belt into groove-a
e. Push hand wheel bach ^ ggiuting toward the clutch nut.
7 If washer (C) has fallen off, replace
e, Beplace nut and .„fng mechanism. 1. the
After doing thrs, turn ecu uu .
needle still moves up and down y
Give the washer a half tarn and replace the .
19