The set of hemmers, Zzln – SINGER W134 User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
31
THE SET OF HEMMERS
Before attaching any of the hemmers, be sure bob
bin thread is pulled up. Then, with hemmer in place,
hold top thread loosely and turn handwheel one full
turn toward you, making a loop under hemmer. Grasp
bobbin thread with both hands and slip horizontally
under hemmer toward back. Bobbin thread will catch
loop and carry upper thread to back of hemmer.
Fold material in
Vs
inch for two inches along edge,
— - - -
°ZZln
with point of noodU. Pull on threads gently as yon start stitching.
Fig. 41
darning
spring
HOW TO ATTACH
Remove presser foot, unthread needle, place darner
spring on needle and slip hook up over needle clamp.
Fig. 42