The adjustable cording and zipper foot, Sewing in a zipper – SINGER W134 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
30
THE ADJUSTABLE CORDING
AND ZIPPER FOOT
This attachment is used to make and
insert covered cording, and to sew in
zippers. Loosen thumb screw to slide
foot to either right or left of needle.
CORDING. Fold bias strip of fabric
cover cord. Loosen thumb screw and
set foot so needle is centered in needle
hole.
Machine
bastes
cord
in
place
;Fig. 39).
To sew covered cord to material, reset adjustable foot so needle stitches
and on edge of base fabric.
Fig. 39
closer to cord,
SEWING IN A ZIPPER
Loosen thumb screw and slide foot so needle enters
center of needle hole. Guide metal of zipper along
edge of foot f F i g . 40). Stitching should be close to
zipper to allow easy opening and closing. Adjust to
sew from either right or left side, whichever is more
convenient.
I
I
r
I
r