Attachment foot, The edgestitcher, Edgestitcher – SINGER W134 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
27
:v
Fig. 31
ATTACHMENT FOOT
In order to attach the binder, edgesticher and the
hemmers, it is necessary to remove the presser foot
and replace it with the attachment foot. Fig. 31.
Mount binder, edgestitcher or hemmers sliding the
attachment to the left as far as possible and tighten
screw.
The mounting slot enables you to sew as close to
or as far away from the edge as desired. Just move
the attachment to the correct position before tightening
the mounting screw.
THE EDGESTITCHER
The edgestitcher is used in mak
ing
lace
insertions,
edgings
and
pipings. The slots serve as guides.
To sew lace edging to fabric, place
the material you want on top in slot
Fig. 31 and the other piece in slot
4, Fig. 33.
To trim with a wide piping, place
the fabric in slot 4, and the fold of
the piping to the left in slot 3, for
a narrow piping, place the fabric
, , o
in slot 2 and the folded edge of the piping to the right in slot 3.
Slot 5 may be used as a guide in stitching a french seam.