SINGER 14U285B User Manual
SINGER Sewing machines
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Table of contents
Document Outline
- 1. Selection of stitches
- 2. Handy reference chart
- 4. Preparation for sewing
- 5. Preparation for threading
- 6. How to sew double chainstitch
- 7. How to sew twO“thread overlook and overedge
- 8, How to sew three-thread standard overlook, flatlock and wrapped edge overlook
- 11. How to sew four-thread safety stitch
- 13. How to adjust stitch length
- 4. How to fine-tune overedge seam width
- 5. How to sew rolled hem
- 16. Differential feed (with differential feed machine only)
- 17. Free arm sewing (tubular work)
- 18. Seam guide lines
- 19. Edge guide
- 20. Three-thread flatlock stitch
- 21, Two-thread flatlock stitch
- 22, Two or three-thread blindstitching
- 23. Braiding by chaining-off
- 24, Two or three-thread pin tucking
- 25. Reinforced (tapes) overedge stitching
- 26. Applying elastic
- 27. Turning square corners
- 28. How to replace stationary knifs
- 29, How to exchange light bulb
- 30. How to adjust presser foot pressuri
- 31. Lubrication
- 32, Reasons for poor stitches and how to make adjustment
- 33. Ralationshìp between cloth, thread and needle
- 34. Accessories
- 35. Specification