SINGER W1410 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
STRAIGHT STITCH AND ZIGZAG STITCH
Presser foot....................
Patter selector................ . . . . . . . .M ( ctD ) or 0 ( CZ3 ) (for straight stitch)
1-5 (W^ ) (for zigzag stitch)
Stitch length dial............. ...............0.3 ~ 4
Starting Sewing
1 Be sure both the threads are drawn back under the presser foot
2. While holding the threads with your left hand, turn the blance
wheel toward you to bring the needle into the fabric where
you wish to start sewing.
3. Lower the presser foot, and press the speed controller gently,
then start sewing slowly.
*Sew a few reverse stitches by pushing reverse button for rein
forcing the end of seams.
‘Raise the needle to its highest position before turning the
pattern selector dial and stitch width dial.
-
18
-