SINGER W1410 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SEWING ZIPPERS -ZIPPER FOOT OFiTONAL
Presser foot..................................... zipper foot
Pattern selector............_................. M (rt~) )
Stitch length dial............................. 1 to 4
Zipper foot
- 3
Raise the foot and the needle to its highest position by turning
the balance wheel towards you. Replace the foot with the zipper
foot.
1. Pin or baste the zipper tape to the fabric and place the work
piece in position under the foot.
Attach snap on zipper foot so that the needle passes on its
left hand side.
* When starting sewing, both needle and bobbin threads ends
should be pot away under the foot
2. Sew on the right side of the zipper by guiding zipper teeth
as close as possible to the needle drop. Before the foot reaches
the slider on the zipper tape, raise the foot and open the
zipper by keeping the needle in the fabric.
Lower the foot and sew on theremaider of the seam.
To sew the left side of the zipper, change position of foot to bring
the foot to the left side of the needle. Sew on in the same way
as you did on the right side of zipper.