Stitch length regulator – SINGER 1360 Style-O-Matic User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1 3
STITCH LENGTH REGULATOR
TO RELEASE
Numerals on left side of indicator
represent number of stitches per inch.
Numerals on right side represent
stitch length in millimeters.
Upper inclined area of the regulator
represents stitch lengths above 20.
Lower inclined area of the regulator
allows the #6 stitch length setting to
be **locked’' in place when stitching
folds, pleats or multiple layers of
heavy fabric.
To set stitch length
® Release pointer by turning thumb
nut to the left.
• Position lever for desired stitch
length.
• Tighten pointer against plate by
turning thumb nut to the right.
Once the pointer has been positioned, reverse stitching is accomplished
by raising the lever to its highest point. The #6 ^'locked'’ position must be un
locked for reverse stitching.