SINGER 1360 Style-O-Matic - Manual (Page 71)

69
TO REMOVE AND REPLACE BOBBIN CASE
• Open slide plate and remove throat
plate (see
page 14).
• Unlock bobbin case by lifting and
pulling holder to right as shown.
• Remove bobbin case from machine.
9
Remove all lint, fluff or other foreign
matter which might clog machine.
• Replace bobbin case so that groove
under tension spring fits on hook race­
way and fork of case straddles position­
ing stud.
• Push bobbin case holder to left until it
snaps down into lock position.
• Replace throat plate and close slide
plate.
POSITIONING
STUD