The ruffler – SINGER 1360 Style-O-Matic User Manual
Page 60
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
58
FORK
ARM
THE RUFFLER
ADJUSTING
LEVER
ADJUSTING
FINGER
'ADJUSTING
SCREW
SEPARATOR RUFFLING ^SEPARATOR
BLADE
BLADE
GUIDE
This attachment offers a simple and
effective way to make gathered and
pleated ruffles. Ruffles may be made
separately or made and applied at the
same time.
STITCH WIDTH: 0
NEEDLE POSITION: C
STRAIGHT STITCH THROAT PLATE
RUFFLER
Adfusting Points
1. Adjusting lever sets ruffler for gathers
or pleats.
Number 1 space setting is for
gathers and places fullness at every
stitch. Numbers 6 and 12 are space
settings for pleats, spacing them 6 or
12 stitches apart. Star is for straight
stitching and is used when grouping
gathers or pleats.
2.
Adjusting finger is used only for
pleating
and affects width of pleat. It
is disengaged by bringing it out of
contact with adjusting screw.
3. Adjusting screw regulates fullness of
gathers or pleats.
When turned in to its
limit with adjusting finger in place,
attachment is set for its deepest pleat.
When turned outward to its limit, with
adjusting finger out of action, ruffler
gives only a hint of fullness.