SINGER 1360 Style-O-Matic User Manual
Page 49
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
4 7
Position button under foot so that needle will enter into left hole. Lower foot.
Turn hand wheel toward you until needle rises out of fabric and is just above foot.
Set stitch width selector at 3. Needle should then enter into right hole in
button. Take approximately six zigzag stitches at this setting. End on left side.
To fasten stitching, adjust to O and take three stitches.
BUTTON SEWING (Cont’d)
Advertising
This manual is related to the following products: