Multi-slotted binder – SINGER 1360 Style-O-Matic User Manual
Page 58
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
56
MULTI-SLOTTED BINDER
ADJUSTING
LUG
SLOT FOR
FOLDED BIAS
TAPE
SCROLL FOR
UNFOLDED
BINDING
Multi-slotted binder is used to apply
commercial binding as well as self
fabric bias to an unfinished edge. This
colorful trim is attractive when applied
to children’s wear, aprons and house
hold textiles. It is a practical finish for
seam edges that ravel and for making
bound seams.
The binder will accommodate both
straight and zigzag stitching.
FASHION DISCS: ALL
STITCH WIDTH: 0 THRU 4
NEEDLE POSITION: C
GENERAL PURPOSE THROAT PLATE
MULTI-SLOTTED BINDER
Commercial single fold bias tape is
inserted from right into slot at wide
end of scroll. Unfolded bias 15/16"
wide is inserted into opening at end
of scroll.
Cut binding diagonally and pull
through scroll until evenly folded
edges are under needle. Free length of
binding is held between guide pins.
Insert edge to be bound into center
of scroll. Position stitching by moving
scroll portion of binder to right or
left by means of adjusting lug.