SINGER 9100 User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

RAISING THE BOBBIN THREAD

Now that you have wound the bobbin and

threaded the needle, you will need to raise the
bobbin thread through the hole in the needle
plate.

1.

Hold needle thread lightly with left hand and

turn hand wheel slowly toward you so that

needle enters needle plate.

2.

Continue turning hand wheel and holding

needle thread until needle rises and brings
up bobbin thread in a loop.

3. Undo the loop with your fingers.

Step 1

Place both needle and bobbin threads under

the presser foot, and draw them diagonally
to the back of the machine.

Step 2

Step 3

\

Step 4

10—

Advertising
This manual is related to the following products: