Preparation, Straight stitching – SINGER 9100 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3.straight Stitching
preparation
Before moving the stitch width selector, make
sure the needle is above the needle plate.
SETTING THE MACHINE
1. Press down on stitch width selector lever
and slide lever to right until groove in lever
is directly under the straight-stitch symbol \
(setting 0).
For your convenience, the position numbers
0.1 .2 .3.4.5 will be used throughout this
book
when
the
instructions
require
stitch
width settings.
2 For ordinary stitching, centre needle position
is preferred. To meet special requirements.
a line of stitching may be placed to right
or left of centre
3
Set stitch length selector for desired stitch
length. (See page 13 for instructions.)
Stitch Width Selector
Set for Straight Stitching
Needle Position Selector
Left
, Centre
I I p Right
Stitch Length Selector
— 11—