SINGER 9100 - Manual (Page 32)

Buttonholes (Continued)
Side Stitching
A c B
Procedure
Place work under the presser foot, aligning
centre marking of buttonhole with the needle
Side stitching
Set stitch width selector at 3 Position the
needle in the fabric at point A Lower the pres­
ser foot and stitch down left side to end of
buttonhole marking, stopping at point B Raise
presser foot and pivot work on needle Take one
stitch
at same stitch width setting bringing
needle to point C.
Bar Tack
C
D •=
Bar tack
Set stitch width selector at 5 and take app­
roximately 6 stitches ending at point D
— 30—