SINGER W761 - Manual (Page 22)

Lace Trimmed Hem
To attach lace to hem, insert lace in the slot next to
needle. Sew hem as above, guiding lace under needle
and hem into scroll.
Lacc Edge with Invisible Stitching
Hold lace 1 8 inch from raw edge on right side of
fabric. Insert both in scroll as for plain narrow hem.
Let hem roll over and sew in lace. Press lace out flat
along edge with hem turned up. For a little fullness
in lace, feed it freely under scroll.
French Seam
With right sides together, place top piece of material
1 8 inch inside edge of lower piece.
Insert in hemmer scroll, allowing hem to roll over and
sew in top fabric, making French seam.
Flat Felled Seam
Open out P'ranch seam and insert rolled edge in scroll
of hemmer. Edgestitch to lay seam flat.
2. Quilting Guide. This guide for making parallel
rows of stitching is attached by placing the pronged
holder between the presser foot and the presser foot
clamp screw (Fig. 36). Adjust the curved bar to press
lightly on the faiaric. By letting the guide ride on the
first stitching line, successive rows will be an equal
distance apart. When the bar is attached so that the
curved part is to the right of the needle, it may also
serve as a seam width guide.
Fig. 36
( 17 )
00
o
o