SINGER W761 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Leave the presser foot down, drop the feed to
"E"
and take five or six stitches to close the buttonhole.
Stop the machine with the needle out of the fabric, but do not raise the foot.
Return stitch width to 0 and take two or three stitches, which will fasten the bar threads and prevent
ravelling.
Cut the buttonhole opening with the seam ripper, being careful not to cut the stitching.
If you plan to make buttonholes on sheer or soft material, place tarlatan or paper, which can be torn
away after stitching, under the fabric. And it is always wise to make several buttonholes on scraps
of fabric before working on the garment.
Fig.
m
(
20
)
00
o
o