SINGER W761 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3.
Sewing on Buttons.
Exchange the regular presser foot for the one provided to sew on
buttons. I See Fig 37.) Drop the feed to "E" position. Place button and fabric under
presser foot. Determine the width of the stitch needed to enter each hole of the button
by turning the hand wheel slowly toward you as you adjust the zigzag regulating knob.
Then lock at that width. Take six or seven stitches to fasten the button securely. Then
turn the knob to 0 and take two or three more stitches in one hole to lock the threads.
Repeat' the procedure when sewing on four-hole buttons.
Snaps and hooks may be stitched on in the same manner.
Fig. ,37
18
00
o
o