1 i j – SINGER 1021 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1 i J
Before you move the selectors to set your
sewing machine for straight stitching,
turn the hand wheel toward you until the
needle is above the needle plate.
SETTING THE MACHINE
• Move needle position selector to X
(center).
I
• Set stitch width selector on •
Needle Position
Stitch Width
STARTING TO SEW
« Place needle and bobbin threads under
presser foot and draw to back of
machine.
• Position the needle in the fabric where
desired for stitching start.
• Lower the presser foot and start the
machine.
To sew perfectly on a wide variety of
fabrics, adjust stitch length, pressure and
thread tension as instructed on the
following pages.
16