Save this instruction – SINGER 1021 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8. To disconnect, turn all controls to the off (”0”) position, then
remove plug from outlet.
9. Do not unplug by pulling on cord. To unplug, grasp the plug,
not the cord.
10. Keep fingers away from all moving parts. Special care Is
required around the sewing machine needle.
11. Always use the proper needle plate. The wrong plate can
cause the needle to break.
12. Do not use bent needles.
13. Do not pull or push fabric while stitching. It may deflect the
needle causing it to break.
14.
Switch the sewing machine off (”0”) when making any
adjustments in the needle area, such as threading needle,
changing
needle,
threading
bobbin,
or
changing
presser
foot, and the like.
15.
Always unplug sewing machine from the electrical outlet
when removing covers, lubricating, or when making any
other user servicing adjustments mentioned in the instruc
tion manual.
16. Machine has be stored in dry and clean rooms to protect
against rust.
SAVE THIS INSTRUCTION