SINGER 1021 - Manual (Page 53)

The machine is intended for household use.
Voltage rating ............................................................ ................ 120 Volts
Rated frequency ................................. 60 Hz (Hertz, cycle per second)
Lrght bulb power (1 amp) .................................................... max 12 Watts
Appliances class II — machine does not require earthing
CAUTION
Read all Instructions before using the sewing machine.
DANGER
An appliance should never be left unatlended when plugged in.
Always unplug this appliance from the electric outlet immediately
after using and before cleaning.
WARNINGS
1. Never operate the appliance with the air openings blocked.
Keep the air openings free of lint, hair, loose clothes and the
like.
2. Keep fingers away from all moving parts. Special care is requi­
red around the sewing machine needle.
3. Do not use bent needles.
4. Always use the proper needle plate. The wrong plate can cause
the needle to break.
5. Do not pull or push fabric while slitching. It may deflect the
needle causing it to break.
6. Switch the sewing machine off „0” when making any adjust­
ments in the needle area, such as threading needle, changing
needle, threading bobbin, or changing presser foot, and the
like.
7. Always unplug sewing machine from the electrical outlet when
removing covers, lubricating, or when making any other user
servicing adjustments mentioned the instruction manual.
8. Operate sewing machine only when mounted in sewing machi­
ne table, case, and the like.
9. Always unplug before relamping. Replace bulb with same type
rated max 15 Watts.
10. Sewing machine has a DOUBLE ELECTRICAL INSULATION.
Replacement parts for a double insulated product must be iden­
tical to those parts in the product.