Keeping up appearances – SINGER 1021 User Manual

Page 45

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

keeping up appearances

MENDING

The zig-zag stitch is just as useful for

mending as it for creative sewing. It forms

a flexible bond for repairing tears or se­
wing stretch garments.

Mending a Tear

• Needle Position: JL

• Stitch Width:

\ or %

(maximum)

• Stitch Length: About 1 mm

• General Purpose Needle Plate and Foot

1. Trim ragged edges.

2. Place underlay on the wrong side of

tear for reinforcement. (It is best not
to baste or pin the underlay since you
will be bringing the edges of tear
together in the next step.)

3. Stitch on the right side, bringing the

edges of the tear together.

4. Shorten stitch length at ends and

corners to give extra strength.

5. Trim underlay.

Bar Tacks

Bar tacks, to reinforce points of strain, are
made with the zig-zag stitch at satin stitch

length. Use them at pocket comers, to at­

tach garters, secure shoulder straps, belt
loops and zipper openings.

Tear Mended with

Zigzag Sdlch

Bar-Ta<d(ed Belt Loof»

41

Advertising
This manual is related to the following products: