SINGER W612 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
32
Т rouble
Upper Thread
Breaking
Material
Puckering
Probable Cause
Improperly threaded
Too much tension
Starting v/ith take-up
in incorrect position
Improper setting of
needle
Bent or eye of needle
too sha rp
Bent or blunt needle
Tensions too tight
Dull needle
Stitch length too long
Correction
'^If¡7"í7"th7¡^dm¡^^
page N
0
,
8
.
and rethread machine.
Loosen tension on upper
thread by
thread tension knob to
lower numc
Always start sewing with
take-up
highest position.
Refer to needle setting .nstajctson
No.
Try a new needle.
Discard all blunt or bent
needles and
replace
with new.
See tension adjustment, page No. 10.
Change needle.
Reduce stitch length.