Installing sewing head in cabinet – SINGER W612 User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
50
INSTALLING SEWING HEAD IN CABINET
1. Loosen both head hinge set screws
head hinge hole is clear.
2.
Tilt head hinge fingers up and back
far as they will go.
3.
Carefully slip head onto head hinge;
--making sure fingers are inserted (
as they can go into head hinge hok
4.
Allow the head to rest in its tiltedb
positbn.
5.
Tighten both set screws securely wi
screw driver.
6.
Plug electrical leads into sockets lo<
inside
cabinet.
Cord
identified
wit
“motor” tag must be plugged into s>
marked
“motor”.
Untagged
cord
go
“light” socket.
Advertising