Lx:-;':;: "г,:: ::г .. ьоьь. оо, Setting the needle, Threading the bobbin case – SINGER W612 User Manual
Page 8: Lx:-;':;: "г,:: ::г
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SETTING THE NEEDLE
See Fig. 6. Raise the needle bar A to its highest
point, turning wheel toward you by hand.
Then loosen the needle clamp screw B and the
needle can be inserted into clamp C. Pbce needle
(flat side to right) in the needle cbmp
upward as for as it will go into the needle clomp
hole, tightening the needle clamp screw securely w.th
a screw driver.
After changing the needle make one com^
píete revolution of the balance wheel by hand
to be sure the needle is m the corree
THREADING THE BOBBIN CASE
Hob bobbin case between thumb and forefinger of left he
bobbin 00» is on ,op. Tok. ih. bobbin between thomb ,
Se"r,ensTon "spring end into the fork-.hoped opening of the spi
as shown in Fig. Ю-