To";:r-11. »o, The set of hemmers, Hemmer set – SINGER W612 User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
38
THE SET OF HEMMERS
Before attaching any of the hemmers, be sure bob
bin thread is pulled up. Then, with hemmer m place,
hold top thread loosely and turn handwheel one full
turn toward you, makmg a loop under hemmer. Grasp
bobbin thread with both hands and slip horizontal
ly under hemmer toward back. Bobbm thread w,ll
catch loop and carry upper thread to back of hem
met.
Fold material to suit for two inches along edge,
to"
;:r-
1 1
. »o.
polo, of P..dle, P o l l OP ,h™od. pon.ly o. yop .p. Pi.chinp.
Fig. 7t
HEMMER SET
You can make a hem H' x»,
x<, -
-
hemmer you use. For a few of the many uses see Figs. 72, 73, 74, 75, 76,
and 77.
or
in width, depending upon which