Winding the bobbin – SINGER W612 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Fig. 3
WINDING THE BOBBIN
Fig. ^
Di>.ng=,s t,ond whe.l (5, F«. 3), fro^ -h. -.i.ching n^.chonl.g. by H,.n,n, clg,ch (6, Fs.3)
,gy,„^ yog or coontT olockw..».
gppor ,h,.od
Place a spool of thread on one of the
P' .
.
machine. Run end of thread
guide on arm and down through tension disc
(9, F«.
5,)^^
^
edge
(left fbnge
and from inside out) and pbce bobbin B-on
spindle of bobbin winder (7 Fig. 4.) fiHi^
the notch bobbin over small pm on spindle.
Push bobbin winder against hand wheel.
Hob thread end bosely and start machine
Bobbin will stop winding when it is filled.
Fig. 5
clutch away from you until sewing
mechanism is again engaged so that needle
moves when you turn the hand wheel.
Break off loose thread end used to start
the winding and thread bobbin as stated on
Page 6.