SINGER 101-12 User Manual

Page 39

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

FOOT HEMMER—Hemming and Sewing

on Lace

Start the hem as previously explained, and when

it is well started, raise the needle to its highest point.

37

F

ig

. 36

Raise the hemmer to relieve its pressure on the hem,

pass the end of the lace through the slot in the side

of the hemmer, under the back of the hemmer and

over the hem, as shown in Fig. 35.

Take care that the hem is not displaced in the

hemmer and that the needle goes down through the

lace and hem together. Then let down the presser

bar and guide the lace over the front of the hemmer,

keeping it well into the slot.

FOOT HEMMER—Felling

The two pieces of cloth to be felled should be laid

one over, the other, r^'ght sides together, the edge

of the under piece being a little farther to the right

Advertising
This manual is related to the following products: