J- h, Material to be ruffled – SINGER 101-12 User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
RufHer
Lines 1, 2, 3, 4 and 5 shown in Fig. 42 indicate
where the material is to be placed for various
operations, as follows:
43
J-
H
F
ig
. 42. T
he
R
uffler
and
its
P
arts
Line 1
—-the correct position for the material to
which the ruffled material is applied.
Line 2
—material to be ruffled.
Line
3—the facing for the ruffle.
Line 4—the strip of piping material.
Line
5—the edge to be piped.
Refer to Fig. 42 when inserting the material in
the ruffler.
Advertising
This manual is related to the following products: