SINGER 101-12 User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
than the upper piece. Stitch them together, using
the hemmer as a presser foot, the front end of the
38
F
ig
. 36
hemmer forming a guide for the edges of both pieces,
the upper piece being guided by the inside and the
under piece by the outside of the projecting front of
F
ig
. 37
the foot hemmer (see Fig. 36). Then open the work
out flat, wrong side up, the edges standing up
Advertising
This manual is related to the following products: