SINGER 101-12 User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
instead of on the edge (see Fig. 40). After loosening
the binder set screw and adjusting the binder, the
41
F
ig
40
line of stitching can be brought nearer the centre,
this being more effective when making French folds.
TUCKER
Remove the presser foot and attach the tucker
in its place. The width of the tuck is determined
by the scale of figures nearest the needle, which
shows in eighths and sixteenths of an inch the dis
tance of the edge of the fold from the line of stitching.
The crease or mark for the second and following
tucks is determined by the scale nearest the operator
and this is set by the line in front of the needle hole
in the presser foot. For blind tucks without spaces,
adjust the scale nearest the operator so that the
figure opposite the line on the presser foot will be
the same as that at which the guide is located on
tho scale nearest the needle. To make spaces be
tween the tucks, move the front scale farther to the
left until the desired space is obtained.