Blindstitching – SINGER W4910 Euroflair User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Blindstitching
Blindstitching
Blindstitching has small zig-zag stitches between the
larger zig-zag stitches. It is used for hemming skirts made
of woven and knitted fabrics without the stitches being
visible on the right side.
Check that the needle is in the highest position. Set the
stitch selector at the symbol
va
A/WVWW.
Set the stitch length dial at 1.5 as a recommended basic
setting, but you can reduce or increase the stitch length if
you wish to vary the space between the fastening
stitches.
To avoid hard creasing when hemming certain fabrics,
you can reduce the presser foot pressure one or two
steps.
Before starting to sew, it is wise to switch to half
speed. Test sew on a scrap of fabric and look at the right
side.
The thicker and softer the fabric, the less visible the
stitches will be. When sewing lightweight woven fabrics,
it is unavoidable that a small stitch will show on the right
side.
Fold the fabric as illustrated.
27