SINGER W4910 Euroflair - Manual (Page 8)

Unpacking and putting away the machine
Unpacking
Place the machine on the table, with the recess for the
handle furthest away from you, and fold down the
handle. Lift off the cover and put it aside. Remove the
extension table and the foot control and slide the acces­
sory box to the left from the machine.
Wipe the machine clean before you start sewing, and
be especially careful with the stitch plate and the space
around the needle. The machine is equipped with a
number of presser feet and these are packed in two
plastic bags. Regarding the placing of the accessories,
please refer to page 43 under “Accessory box”.
Putting the machine away
Pull the plugs out of the wall outlet and the socket of
the machine. Wind the cords around your hand, starting
at the foot control and push them into the control com­
partment. Place the control in the rear compartment of
the accessory box, with the wider end downward. The
bottom of the foot control should be turned toward the
machine.
Lower the presser foot. Make sure that aU accessories
are correctly placed in the box. Slide the accessory box
into place and put the extension table into the box.
Fold down, the handle and put on the cover.