Sewing with overlock overlock – SINGER W4910 Euroflair User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sewing with overlock
Overlock
Check that the needle is in the highest position. Turn
the stitch selector to the symbol
and the stitch
length dial to the blue area.
The overlock is used for joining many fabrics but is
particularly suitable for producing narrow, supple stretch
seams in double-knit, ribbing, stretch terry cloth and
other knitted fabrics.
m
■ ■ . i'.U i!.,'' U'i'i
With the overlock stitch you join and overcast simul
taneously. Use 5 mm p/is") seam allowance. When sewing
heavy knits, reduce the presser foot pressure slightly.
If you prefer, you can also cut the garment with a
wider seam allowance, but remember that the left edge
of the seam should then follow the marking for the seam.
You can also use presser foot B as shown in the illus
tration. The left marking of the presser foot can be used
as a guide.
Trim the remaining seam allowance after you have
finished the seam.
32